⚠️ Requires a Kess3 Slave Alientech device that has already been activated.
This product is a software extension, not a device.
KESS3 Slave - OBD Protocols - Car/LCV
€1.290,00HT
Activation of OBD protocols for KESS3 Slave covering passenger cars and light commercial vehicles.
OBD mode reads and writes control unit data via the vehicle's diagnostic port, without removal. This activation covers OBD access on this vehicle range, from older to the latest models.
In Slave version, read files are encrypted. The modified calibration map is provided by your reference Master.
This is the most common entry-level configuration for a workshop adding ECU remapping to its services: OBD mode covers a large proportion of the vehicle parc and initial investment remains limited.
Specifications
- Alientech reference: KESS3SA001
- Version: KESS3 Slave
- Communication mode: OBD
- Segment: passenger cars and light commercial vehicles
- 12-month subscription included on a new device
A KESS3 device (ref. KESS3HW000) and the standard OBDII cable (ref. 144300KOBD) are required.
Complete with another protocol
Pairs well with
Remote activation within 24-48 hours
Interest-free installment payments
Technical support in French
KESS3 Slave - OBD Protocols - Car/LCV
€1.290,00HT
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Informations d'expédition
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQs
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
WHAT THIS PROTOCOL COVERS
Vehicles and Supported Modes
Please check that the category and mode correspond to your usage before ordering, as the protocol cannot be modified after activation.
Car/LCV
Passenger cars and light commercial vehicles, gasoline, diesel, and hybrid, up to 3.5 tons.
OBD mode
Reading and writing via the vehicle's diagnostic socket, without removing the ECU, ideal for quick intervention.
OBD, Bench-Boot or complete package: how to choose?
The three formats exist for the Auto/LCV category. This product corresponds to the complete package, highlighted below.
OBD Only
This product: OBD
Covers only OBD mode for Cars/Vans. Bench-Boot mode can be ordered separately if needed.
Bench-Boot Only
Bench/Boot ECUs
Required for cloning or most secure ECUs that require Bench or Boot intervention.
Complete Pack
OBD + Bench-Boot
Combines both modes for Car/LCV at €1,690.00 ex VAT, cheaper than buying both separately (€2,280.00 ex VAT).
Activation requirements
How is the protocol activated?
Activation is performed remotely on your KESS3 Slave device, using your Alientech ID, within 24 to 48 hours after placing the order
Is the protocol time-limited?
No: activation is permanent for the Car/LVC category and OBD-Bench-Boot mode. Only vehicle compatibility updates are covered for 12 months, and then renewable.
Can I add more categories later?
Yes, each category and mode can be ordered separately or as a pack. You can complete your KESS3 Slave as your business grows (Motorcycle/Quad/UTV, Agriculture/Heavy Duty/Bus, Boats/Jet-ski).
FAQ
Does this protocol work without a KESS3 Slave unit?
No, this is a software extension: it requires a KESS3 Slave Alientech device that you already own and have activated.
Can I add Bench-Boot mode later on Car/LVC?
Yes, by ordering "Bench-Boot Protocols - Car/LCV" (990.00 € excl. VAT) separately. You can also check if the complete Car/LCV OBD-Bench-Boot pack (1,690.00 € excl. VAT) is more advantageous depending on your needs.
What is "full protocol activation"?
This is the equivalent of this protocol, but extended to all vehicle categories (Cars/LCVs, Motorcycles/Quads/UTVs, Agriculture/Heavy Goods Vehicles/Buses, Boats/Jet-skis) for the chosen mode.
Is the protocol different between a KESS3 Slave and a KESS3 Master?
The content of the protocol (vehicles and modes covered) is identical; only the product reference changes depending on your device's version.
Become an RS-Tronic reseller
- €0 entry fee: No entry ticket to join the group
- 90+ resellers in France and internationally: A network that proves the model works
- Files developed on a dynamometer: Manufacturer tolerances and anti-pollution standards respected
- Autonomy preserved: The strength of a large group, your company remains yours