⚠️ Requires an activated Kess3 Slave Alientech device.
This product is a software extension, not a device.
KESS3 Slave - OBD Protocols - Agriculture/Heavy-Duty/Bus
€1.290,00HT
Activation of OBD protocols for KESS3 Slave covering agricultural machinery, heavy-duty vehicles and buses.
OBD mode reads and writes control unit data via the vehicle's diagnostic port, without removal. This activation covers OBD access on this vehicle range, from older to the latest equipment.
In Slave version, read files are encrypted. The modified calibration map is provided by your reference Master.
This configuration suits workshops that carry out on-site work at operators' or hauliers' premises: reading and writing is done on location, with the calibration map prepared by the reference Master.
Specifications
- Alientech reference: KESS3SA003
- Version: KESS3 Slave
- Communication mode: OBD
- Segment: agriculture, heavy-duty vehicles and buses
- 12-month subscription included on a new device
Connectors on this segment are proprietary. Source the appropriate round cables for the brands present in your area.
Complete with another protocol
Pairs well with
Remote activation within 24-48 hours
Interest-free installment payments
Technical support in French
KESS3 Slave - OBD Protocols - Agriculture/Heavy-Duty/Bus
€1.290,00HT
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Informations d'expédition
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQs
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
WHAT THIS PROTOCOL COVERS
Supported vehicles and modes
Please check that the category and mode are suitable for your use before ordering, as the protocol cannot be changed after activation.
Agriculture/Heavy Goods Vehicles/Buses
Tractors and agricultural machinery, heavy goods vehicles, buses and coaches.
OBD mode
Read and write via the vehicle's diagnostic socket, without removing the ECU, ideal for quick intervention.
OBD, Bench-Boot or full pack: how to choose?
This product only covers OBD mode. Compare with Bench-Boot only mode or the full package below before ordering.
OBD Only
This product: OBD
Covers only OBD mode for Agriculture/Heavy Duty/Bus. Bench-Boot mode must be ordered separately if required.
Standalone Bench-Boot
ECU removal needed
Required for cloning or for the most secure ECUs that require a Bench or Boot intervention.
Complete Pack
OBD + Bench-Boot
Combines both modes for Agriculture/HGV/Bus for €1,690.00 excl. VAT, cheaper than purchasing both separately (€2,280.00 excl. VAT).
Activation requirements
How is the protocol activated?
Activation of your KESS3 Slave device is done remotely, via your Alientech ID, within 24 to 48 hours after your order
Is the protocol time-limited?
No, activation is permanent for the Car/LVC category and OBD-Bench-Boot mode. Only vehicle compatibility updates are covered for 12 months, then renewable.
Can I add more categories later?
Yes, each category and mode can be ordered separately or as a pack. You can complete your KESS3 Slave as your business grows (Motorbike/Quad/UTV, Agriculture/Heavy Duty/Bus, Boats/Jet-ski).
FAQ
Does this protocol work without a KESS3 Slave unit?
No, this is a software extension: it requires a KESS3 Slave Alientech device that you already own and have activated.
Can I add Bench-Boot mode later for Agriculture/Heavy Duty/Bus?
Yes, by ordering "Bench-Boot Protocols - Agriculture/Heavy Duty/Bus" (990.00 € excl. VAT) separately. You can also check if the complete Agriculture/Heavy Duty/Bus OBD-Bench-Boot pack (1,690.00 € excl. VAT) is more advantageous depending on your needs.
What is "full protocol activation"?
This is the equivalent of this protocol, but extended to all vehicle categories (Cars/LCVs, Motorcycles/Quads/UTVs, Agriculture/Heavy Vehicles/Buses, Boats/Jet Skis) for the selected mode.
Is the protocol different between a KESS3 Slave and a KESS3 Master?
The content of the protocol (vehicles and modes covered) is identical; only the product reference changes depending on your device's version.
Become an RS-Tronic reseller
- €0 entry fee: No entry fee to join the group
- 90+ resellers in France and internationally: A network that proves the model works
- Files developed on a dynamometer: Manufacturer tolerances and anti-pollution standards respected
- Preserved autonomy: The strength of a large group, your company remains yours