⚠️ Requires an activated Kess3 Master Alientech device.
This product is a software extension, not a device.
KESS3 Master - Bench-Boot Protocols - Car/LCV
€2.490,00HT
Activation of Bench and Boot protocols for KESS3 Master covering passenger cars and light commercial vehicles.
Bench mode reads and writes the control unit by connecting directly to its connector. Boot mode reads and writes by connecting to specific points on its circuit board. This activation covers Bench and Boot access on this vehicle range, from older to the latest models.
These two methods allow work on control units whose OBD write access is locked, an increasingly common situation on newer vehicles. They are also used for control unit repair and cloning.
In Master version, read files can be modified in-house or sent to a tuner of your choice.
Specifications
- Alientech reference: KESS3MA005
- Version: KESS3 Master
- Communication modes: Bench and Boot
- Segment: passenger cars and light commercial vehicles
- 12-month subscription included on a new device
This activation requires a KESS3 device (ref. KESS3HW000). The adapters and harnesses for the control units being programmed must be sourced separately, along with a stable Bench power supply.
Complete with another protocol
Pairs well with
Remote activation within 24/48 hours
Interest-free installment payments
French technical support
KESS3 Master - Bench-Boot Protocols - Car/LCV
€2.490,00HT
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Informations d'expédition
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQs
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
WHAT THIS PROTOCOL COVERS
Supported vehicles and modes
Please check that the category and mode correspond to your usage before ordering, as the protocol cannot be modified after activation.
Car/LCV
Passenger cars and light commercial vehicles, petrol, diesel and hybrids, up to 3.5 tonnes.
Bench-Boot Mode
Reading and writing directly on the ECU (Bench mode) or on its open electronic board (Boot mode), necessary for the most secure ECUs or for cloning.
OBD, Bench-Boot or full package: how to choose?
This product only covers Bench-Boot mode. Compare with OBD Only or the Full Pack below before ordering.
OBD Only
OBD Read Mode
Covers only OBD mode for Cars/LCVs. Sufficient if you almost always work from the diagnostic port, without removing the ECU.
Bench/Boot Only
ECUs in for service: this product
Required for cloning or for the most secure ECUs that demand Bench or Boot intervention.
Complete Pack
OBD + Bench-Boot
Combines both modes for Cars/LCVs for €3,390.00 excluding VAT, cheaper than buying both separately (€5,480.00 excluding VAT).
Activation Requirements
How is the protocol activated?
Activation is performed remotely on your KESS3 Master device, using your Alientech ID, within 24 to 48 hours of the order.
Is the protocol time-limited?
No: activation is permanent for the Car/LVC category and OBD-Bench-Boot mode. Only vehicle compatibility updates are covered for 12 months, then renewable.
Can I add more categories later?
Yes, each category and mode can be ordered separately or as part of a pack. You can complete your KESS3 Master as your activity develops (Motorcycle/Quad/UTV, Agriculture/Heavy Duty/Bus, Boats/Jet-ski).
FAQ
Does this protocol work without a KESS3 Master unit?
No, this is a software extension: it requires an activated KESS3 Master Alientech device that you already own.
Can I add OBD mode later to Car/LCV?
Yes, by ordering "OBD Protocols - Car/LCV" separately (€2,990.00 excl. VAT). You can also check if the complete Car/LCV OBD-Bench-Boot pack (€3,390.00 excl. VAT) is more advantageous depending on your needs.
What is "full protocol activation"?
This is the equivalent of this protocol, but extended to all vehicle categories (Car/LCV, Motorcycle/Quad/UTV, Agriculture/HGV/Bus, Boats/Jet-ski) for the selected mode.
Is the protocol different between a KESS3 Slave and a KESS3 Master?
The content of the protocol (vehicles and modes covered) is identical; only the product reference changes depending on your box version.
Become an RS-Tronic reseller
- €0 Entry Fee: No entry ticket to join the group
- 90+ Resellers in France and Internationally: A network that proves the model works
- Bench-Developed Files: Manufacturer tolerances and anti-pollution standards respected
- Preserved Autonomy: The strength of a large group, your business remains your own