⚠️ Requires an activated Kess3 Slave Alientech device.
This product is a software extension, not a device.
KESS3 Slave - Bench-Boot Protocols - Motorcycle/Quad/UTV
€390,00HT
Activation of Bench and Boot protocols for KESS3 Slave covering motorcycles, quads and UTVs.
Bench mode reads and writes the control unit by connecting directly to its connector. Boot mode reads and writes by connecting to specific points on the circuit board. This activation covers Bench and Boot access on this vehicle range, from older to the latest machines.
In Slave version, read files are encrypted. The modified calibration map is provided by your reference Master.
Specifications
- Alientech reference: KESS3SA006
- Version: KESS3 Slave
- Communication modes: Bench and Boot
- Segment: motorcycles, quads and UTVs
- 12-month subscription included on a new device
A Bench power supply is required to power the control unit outside the vehicle.
Complete with another protocol
Pairs well with
Remote activation within 24-48 hours
Interest-free installment payments
Technical support in French
KESS3 Slave - Bench-Boot Protocols - Motorcycle/Quad/UTV
€390,00HT
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Informations d'expédition
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQs
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
WHAT THIS PROTOCOL COVERS
Supported vehicles and modes
Verify that the category and mode match your usage before ordering, the protocol cannot be modified after activation.
Motorcycle/ATV/UTV
Motorcycles, scooters, quads and SSVs (Side-by-Side / UTV), gasoline and hybrid.
Bench-Boot Mode
Reading and writing directly to the mounted ECU (Bench mode) or to its opened electronic board (Boot mode), necessary for the most secure ECUs or for cloning.
OBD, Bench-Boot or full package: how to choose?
This product only covers Bench-Boot mode. Compare with OBD-only or the complete pack below before ordering.
OBD Only
OBD Read Mode
Covers only OBD mode for motorcycles/quads/UTVs. Sufficient if you almost always work from the diagnostic socket, without removing the ECU.
Bench-Boot only
ECUs in stock: this product
Required for cloning or the most secure ECUs that require Bench or Boot intervention.
Complete Pack
OBD + Bench-Boot
Combines both modes for Motorcycles/Quads/UTVs for €690.00 excl. VAT, cheaper than purchasing them separately (€980.00 excl. VAT).
Activation requirements
How is the protocol activated?
Activation is performed remotely on your KESS3 Slave unit, using your Alientech ID, within 24 to 48 hours after the order is placed
Is the protocol time-limited?
No: activation is permanent for the Car/LVC category and OBD-Bench-Boot mode. Only vehicle compatibility updates are covered for 12 months, after which they can be renewed.
Can I add more categories later?
Yes, each category and mode can be ordered separately or as a pack. You can complete your KESS3 Slave as your business develops (Motorcycle/Quad/UTV, Agriculture/Heavy Duty/Bus, Boats/Jet-ski).
FAQ
Does this protocol work without a KESS3 Slave unit?
No, this is a software extension: it requires a KESS3 Slave Alientech device that you already own and have activated.
Can I add OBD mode later to Motorcycle/Quad/UTV?
Yes, by ordering "OBD Protocols - Motorcycle/Quad/UTV" (590.00 € excl. VAT) separately. You can also check if the complete Moto/Quad/UTV OBD-Bench-Boot pack (690.00 € excl. VAT) is more advantageous for your needs.
What is "full protocol activation"?
This is the equivalent of this protocol, but extended to all vehicle categories (Cars/LCVs, Motorcycles/Quads/UTVs, Agriculture/Heavy Goods Vehicles/Buses, Boats/Jet Skis) for the chosen mode.
Is the protocol different between a KESS3 Slave and a KESS3 Master?
The content of the protocol (vehicles and modes covered) is identical; only the product reference changes depending on the version of your unit.
Become an RS-Tronic reseller
- €0 entry fee: No entry fee to join the group
- 90+ resellers in France and internationally: A network that proves the model works
- Dyno-developed files: Manufacturer tolerances and anti-pollution standards respected
- Autonomy preserved: The strength of a large group, your business remains your own