⚠️ Requires an activated Alientech Kess3 Slave device.
This product is a software extension, not a device.
KESS3 Slave - Bench-Boot Protocols - Car/LCV
€990,00HT
Activation of Bench and Boot protocols for KESS3 Slave covering passenger cars and light commercial vehicles.
Bench mode reads and writes the control unit by connecting directly to its connector. Boot mode reads and writes by connecting to specific points on the circuit board. This activation covers Bench and Boot access on this vehicle range, from older to the latest models.
These modes give access to OBD-locked control units, whose share is growing on newer vehicles. They are also used for cloning a replacement control unit.
In Slave version, read files are encrypted. The modified calibration map is provided by your reference Master.
Specifications
- Alientech reference: KESS3SA005
- Version: KESS3 Slave
- Communication modes: Bench and Boot
- Segment: passenger cars and light commercial vehicles
- 12-month subscription included on a new device
The adapters for the control units being programmed and a Bench power supply must be sourced separately.
Complete with another protocol
Pairs well with
Remote activation within 24/48 hours
Interest-free installment payments
Technical support in French
KESS3 Slave - Bench-Boot Protocols - Car/LCV
€990,00HT
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Informations d'expédition
Use this text to answer questions in as much detail as possible for your customers.
-
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
-
FAQs
Use this text to answer questions in as much detail as possible for your customers.
-
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
WHAT THIS PROTOCOL COVERS
Supported vehicles and modes
Please check that the category and mode are suitable for your use before ordering, as the protocol cannot be modified after activation.
Cars/LCVs
Passenger cars and light commercial vehicles, gasoline, diesel, and hybrid, up to 3.5 tons.
Bench-Boot Mode
Reading and writing directly to the mounted ECU (Bench mode) or to its opened electronic board (Boot mode), necessary for the most secure ECUs or for cloning.
OBD, Bench-Boot or complete pack: how to choose?
This product covers Bench-Boot mode only. Compare with OBD-only mode or the complete pack below before ordering.
OBD Only
OBD Reading Mode
Covers only OBD mode for Cars/LCVs. Sufficient if you almost always work from the diagnostic port, without removing the ECU.
Bench-Boot only
ECUs in Boot Mode: this product
Required for cloning or the most secure ECUs that require Bench or Boot intervention.
Complete Pack
OBD + Bench-Boot
Combines both modes for Car/LCV at €1,690.00 excl. VAT, cheaper than purchasing both separately (€2,280.00 excl. VAT).
Activation requirements
How is the protocol activated?
Activation is performed remotely on your KESS3 Slave device, using your Alientech ID, within 24 to 48 hours after placing the order
Is the protocol time-limited?
No: activation is permanent for the Car/LVC category and OBD-Bench-Boot mode. Only vehicle compatibility updates are covered for 12 months, and then renewable.
Can I add more categories later?
Yes, each category and each mode can be ordered separately or as a pack. You can complete your KESS3 Slave as your activity progresses (Motorcycle/Quad/UTV, Agriculture/Heavy Duty/Bus, Boats/Jet-ski).
FAQ
Does this protocol work without a KESS3 Slave box?
No, this is a software extension: it requires an Alientech KESS3 Slave tool that you already own and have activated.
Can I add OBD mode later on Car/LCV?
Yes, by ordering "OBD Protocols - Car/Light Commercial Vehicle" (1,290.00 € excl. VAT) separately. You can also check if the complete Car/Light Commercial Vehicle OBD-Bench-Boot pack (1,690.00 € excl. VAT) is more advantageous depending on your needs.
What is "full protocol activation"?
This is the equivalent of this protocol, but extended to all vehicle categories (Cars/LCVs, Motorcycles/Quads/UTVs, Agriculture/Heavy Goods Vehicles/Buses, Boats/Jet Skis) for the chosen mode.
Is the protocol different between a KESS3 Slave and a KESS3 Master?
The protocol content (vehicles and modes covered) is identical; only the product reference changes depending on your device's version.
Become an RS-Tronic reseller
- €0 entry fee: No entry ticket to join the group
- 90+ resellers in France and internationally: A network that proves the model works
- Bench-developed files: Manufacturer tolerances and anti-pollution standards respected
- Autonomy preserved: The strength of a large group, your company remains your own